請注意，此產品已停產。建議的替代產品請參考此連結 »
Overview
Introduction
Nuvo-3100VTC is a in-vehicle fanless embedded controller with E-Mark and EN50155/EN50121-3-2 certificate for in-vehicle usage. It supports 3rd-Gen i7 quad-core CPU to provide extraordinary performance for emerging high-end requirements. It also integrates four IEEE 802.3at PoE+ ports to facilitate Ethernet connectivity and power IP cameras for surveillance applications.
Nuvo-3100VTC takes into account all demands of in-vehicle applications. It has very compact footprint to fit into restricted space. Its 8V to 35V wide-range DC input and enhanced surge protection make Nuvo-3100VTC highly robust when car power applied.
Nuvo-3100VTC further incorporates built-in RAID supporting data striping (RAID 0) and data mirroring (RAID 1) for two 2.5" HDDs. You can also take advantage of the easy-swappable HDD tray for easy HDD replacement. For in-vehicle installation, our patent mounting bracket can absorb shock/vibration and extend overall system reliability.
Combining superior performance, PoE+ and comprehensive design, Nuvo-3100VTC presents more possibilities for innovative in-vehicle applications!
■ NEOUSYS MARKETING TEAM
Product Highlights
4x 802.3at PoE+ Ports
Power Over Ethernet, or PoE, is a technology that passes electrical power along with data on a single CAT5/6 cable. Compliant with IEEE 802.3at PoE+ standard, Nuvo-3100VTC can supply 25.5W to each of its four ports. For in-vehicle surveillance applications, PoE+ significantly reduces the complexity of camera installation as only one CAT5/6 cable is enough to connect and power the camera.
![4x 802.3at PoE+ Ports]()
RAID with Easy-Swappable HDD Tray
Nuvo-3100VTC has built-in hardware RAID to enhance reliability and efficiency of disk access. It maintains two 2.5" SATA drives and supports RAID 0 (higher throughput) and RAID 1 (data redundancy). In addition, Nuvo-3100VTC hosts a easy-swappable HDD tray to accommodate one of SATA drives for storing portable information.
![RAID with Easy-Swappable HDD Tray]()
Comprehensive Power Design for In-Vehicle Applications
Aiming at in-vehicle usage, Nuvo-3100VTC has comprehensive power circuitry design. It accepts 8V to 35V DC input range with enhanced surge protection to work reliably with battery power on the car (12V) or bus/truck (24V). Ignition power control is implemented to respond ACC signal according to configurable power on/off delay.
Application
1. Fleet management
2. Mobile NVR
3. Real-time surveillance/security
4. High-end digital signage
Specification
| System Core |
| Processor |
Intel® Core™ i7-3610QE (2.3/3.3 GHz, 6 MB cache)
Intel® Core™ i5-3610ME (2.7/3.3 GHz, 3 MB cache)
Intel® Celeron™ 1020E (2.2 GHz, 2 MB cache) |
| Chipset |
Intel® QM77 PCH with AMT & RAID support(Nuvo-3100VTC)
Intel® HM76 PCH(Nuvo-3120) |
| Graphics |
Integrated Intel® HD Graphics 4000 Controller |
| Memory |
1x 204-pin SO-DIMM sockets,
up to 8 GB DDR3 1333/1600 MHz SDRAM |
| I/O Interface |
| Ethernet |
1x Gigabit Ethernet port by Intel® 82579LM
3x Gigabit Ethernet ports by Intel® i210
(Nuvo-3100VTC)
1x Gigabit Ethernet port by Intel® 82579LM
1x Gigabit Ethernet ports by Intel® i210
(Nuvo-3120) |
PoE
(Nuvo-3100VTC only) |
Compliant to IEEE 802.3at (25.5W) with per-port power on/off
control |
| Video Port |
1x DVI-I connector for VGA/DVI output, supporting
2048x1536 (VGA) or 1920x1080 (DVI) resolution
2x DisplayPort, supporting 2560x1600 resolution |
| Serial Port |
2x software-programmable RS-232/422/485
(COM1 & COM2) |
| USB |
4x USB 3.1 Gen1 ports and 4x USB 2.0 ports |
| Isolated DIO |
4x isolated DI with COS interrupt and 4x isolated DO |
| Audio |
1x mic-in and speaker-out |
| Storage Interface |
| SATA HDD |
1x Internal SATA port for 2.5” HDD/SSD
1x Easy-swapable HDD tray for 2.5” HDD/SSD (Nuvo-3100VTC)
1x Internal SATA port for 2.5” HDD/SSD (Nuvo-3120) |
| mSATA |
1x full-size mSATA (SATA/USB/W_DISABLE#) with USIM
socket |
| Expansion Bus |
| Mini PCI-E |
1x full-size mini PCI Express socket with USIM socket
1x half-size mini PCI Express socket |
| Power Supply & Ignition Control |
| DC Input |
8V to 35V DC input via 3-pin pluggable terminal block |
Ignition Control
(Nuvo-3100VTC only) |
Ignition control with user-selectable on/off delay |
| Mechanical |
| Dimension |
210 mm (W) x 165 mm (D) x 62 mm (H) |
| Weight |
2.8 kg (including one 2.5” HDD and DDR3 SODIMM) |
| Mounting |
Wall-mounting (Standard) or DIN-Rail mounting (Optional) |
| Operating Temperature |
w/i7-3610QE
100% CPU loading |
-25°C ~ 50°C**(Max performance)
-25°C ~ 60°C**(Reduced performance)
-25°C ~ 70°C**(Extended performance) |
w/i5-3610ME
100% CPU loading* |
-25°C ~ 60°C**(Max performance)
-25°C ~ 70°C**(Reduced performance)
-25°C ~ 70°C**(Extended performance) |
w/Celeron 1020E
100% CPU loading* |
-25°C ~ 70°C** |
| Environmental |
| Storage Temperature |
-40°C ~ 85°C |
| Humidity |
10%~90% , non-condensing |
| Vibration |
Operating, 5 Grms, 5-500 Hz, 3 Axes(w/ SSD,
according to IEC60068-2-64) |
| Shock |
Operating, 50 Grms, Half-sine 11 ms Duration (w/
SSD, according to IEC60068-2-27) |
| Certification |
E-Mark for vehicle applications
EN 50155/ EN 50121-3-2
CE/ FCC Class A, according to EN 55022, EN 55024 & EN 45545 |
* The 100% CPU loading is applied using Passmark® BurnInTest™ v7.0. For detail testing criteria, please contact Neousys Technology.
**For sub-zero operating temperature, a wide temperature range HDD drive or Solid State Disk (SSD) is required..
Nuvo-3100VTC-I7QC
Intel® Core™ i7-3610QE fanless in-vehicle controller with 4x 802.3at PoE+ ports and dual-drives RAID
Nuvo-3100VTC-I5DC
Intel® Core™ i5-3610ME fanless in-vehicle controller with 4x 802.3at PoE+ ports and dual-drives RAID
Nuvo-3100VTC-C1020
Intel® Celeron™ 1020E fanless in-vehicle controller with 4x 802.3at PoE+ ports and dual-drives RAID
Nuvo-3110VTC
Intel® 3rd-Gen Core™ i fanless in-vehicle controller with 4x GbE ports and dual-drives RAID
Optional Accessories
DINRAIL-31
DIN-rail mounting assembly for Nuvo-3100VTC series
PA-120W-OW
120W AC/DC power adapter 20V/6A; 18AWG/120cm; cord end terminals for terminal block, operating temperature : -30 to 70 °C.
