Overview
Introduction
The PB series is a standalone power backup module that can protect your box-PC against power outages. Utilizing state-of-the-art supercapacitor technology, it can operate in harsh environments from -25°C to 65°C and have extremely high durability lasting over 10 years.
PB-2580J-SA and PB-4600J-SA are composed of eight and four 370F/ 3.0V supercapacitors, respectively, while PB-2580J-SA is composed of eight 100F/ 2.7V supercapacitors. They each offer 9250, 4600 and 2580 watt-second energy to offer extra extended operation time to backup your system.
Thanks to Neousys' patented CAP energy management technology, PB-2580J-SA can reliably supply up to 70W of power to the back-end system and automatically manage boot and shutdown without installing additional drivers/ software. In addition to the UPS-like power backup mode, it also offers two advanced ignition control modes for in-vehicle usage.
PB-2580J-SA can work with either standard box-PC or in-vehicle controller to provide a stable power supply and execute user-configurable power-on/ power-off delay according to IGN signal input. Featuring various modes, automatic shutdown control and up to 70W output power, Neousys PB series can work with most off-the-shelf box-PCs. And with properties such as maintenance-free energy storage and uninterruptible power supply, the PB series can prevent the connected back-end system from data loss during a power outage in harsh industrial environments!
Recommended Combination by Applications
![Machine vision computer with normal backup mode, In-vehicle computer with ignition relay mode, IoT edge gateway with ignition control mode]()
Video Demo
Unboxing PB-2580J-SA, Industrial-grade Standalone Intelligent Power Backup Module
Unboxing PB-2580J-SA: Three Scenarios with Intelligent Supercapacitor-based Power Backup Module
Specification
| |
PB-9250J-SA |
PB-4600J-SA |
PB-2580J-SA |
| Supercapacitor Configuration |
| Composition |
8x 370F, 3.0V
supercapacitors |
4x 370F, 3.0V
supercapacitors |
8x 100F, 2.7V
supercapacitors |
| Capacity |
9250 watt-second |
4600 watt-second |
2580 watt-second |
| Expected lifespan |
>10 years* |
| Lifecycle |
500,000 charging/ discharging cycles* |
| Power Specification |
| Input Voltage |
12~ 35VDC |
| Input Connector |
1x 3-pin pluggable terminal block (V+, GND, IGN_IN) |
| Output Voltage |
Charge mode: DC_IN bypass (DC_OUT = DC_IN)
Discharge mode: 12 or 24V** |
| Output Power |
Maximum 180W
output** |
Maximum 100W
output** |
Maximum 70W
output** |
| Output Connector |
1x 3-pin pluggable terminal block (V+, GND, IGN_OUT) |
| I/O Interface |
| COM Port |
1x DB9 for 3-wire RS-232 |
| Iso. DIO |
1x 10-pin pluggable terminal block for
- PWR_BTN# output
- SYS_STAT input |
| |
PB-9250J-SA |
PB-4600J-SA |
PB-2580J-SA |
| Mechanical |
| Dimension |
82.5mm(W) x 175.2mm(H) x 128.2mm(D) |
32.8mm(W) x 176.6mm(H) x 126mm(D) |
| Weight |
1.7kg |
1.68kg |
0.93kg |
| Mounting |
DIN-rail mounting and wall-mounting |
| Environmental |
| Operating Temperature |
-25°C ~ 65°C
-40°C ~ 85°C with reduced energy capacity |
| Storage Temperature |
-40°C ~ 85°C |
| Vibration |
Compliant with IEC61373:2010, Category 1, Class B Body mounted (part of EN50155) |
Operating, MIL.STD-810G, Method 514.6, Category 4 |
| Shock |
Compliant with IEC61373:2010, Category 1, Class B Body mounted (part of EN50155) |
Operating, MIL.STD-810G, Method 516.6, Procedure I, Table 516.6-II |
| EMC |
Compliant with EN50155:2007,
CE/FCC Class A, according to EN 55032 & EN 55035 |
CE/FCC Class A, according to EN 55032 & EN 55024 |
* To achieve > 10 years lifespan under 24/7 at 65°C operation, please charge PB-9250J-SA to 6525J energy level using the 4.8x SuperCAP Lifetime Extension setting (please refer to the user manual for details). Once the rated lifetime or cycle life has been reached, the capacity of supercapacitor may decrease up to 30% and ESR may increase up to 100% from initial values.
** Backup time for uninterruptible operation may be reduced when sustaining a back-end system with high power consumption. Please consult with Neousys Technology if your computer accepts only constant-voltage input.
*** To ensure PB-9250J and PB-4600J’s power backup operation functions as intended, please contact Neousys Technology technical support if your connecting back-end system accepts only constant voltage input.
PB-2580J-SA
Standalone intelligent supercapacitor-base power backup module with 2580 W.s energy capacity
